Premier Pits Case Studies

Working & Maintenance Pits Case Studies

Soft Sand Installation Case Study

Working & Maintenance

Installing two working pits and one full MOT pit into a newly built workshop.

High Water Table Case Study

Working & Maintenance

Replacement of three brick and block pits due to severe leakage from high water tables and dealing with an overflow of water during the installations of the new pits.

Inspection Pits Case Studies

Why You Should Choose A Premier Pits Full Installation

Installation

11 good reasons why you should let Premier Pits install your pit No-one cares as much as Premier Pits to install your pit correctly. Experience is everything. We install 4 pits a week and have [...]

Pit Replacement Case Study

Inspection Pits

To dig out 10 old pits and replace them with 9 new pits within a 12 week period, whilst the workshop was still under 24 hour operation.

Class 4, 7 and 4/7 ATL Pits Case Studies

Robin Hood MOT Bay Case Study

Class 4 7 and 4/7 ATL Pits

Removal of an existing vehicle lift and installation of a Premier Class 4 Pit. Manufactured with lights and shaker plates.

DVSA Pits Case Studies

Heavy Reinforced Concrete Floor Case Study

DSVA Pits

To replace a traditional pit, for a leading transport company, in what was originally a heavily reinforced factory floor in The Midlands.

ATF Buildings Case Studies

ATF Testing Lane Case Study

ATF Buildings

To install a new ATF facility that would comply with current DVSA rules and regulations.

Under Chassis Wash Case Studies

Vehicle Cleaning Case Study

Under Chassis Wash

In limited spaces numerous vehicles require a wash down from the top to the undercarriage of the chassis in preparation for an MOT.

Rail Pits Case Studies

Railway Technology Centre Case Study

Rail Pits

Premier Pits was appointed in October 2016 to install a prefabricated vehicle pit. The original scope was to install the pit with in situ reinforced concrete.